本合同由_________公司，主营业所在中国_________（以下称甲方），与_________公司，主营业所在美国_________（以下称乙方）于_________年_________月_________日在中国_________签署。
兹证明
鉴于乙方拥有现用于制造钢丝绳的机器设备，并愿意将机器设备卖给甲方
鉴于乙方同意购买甲方用已方提供的机器设备生的产钢丝绳，以补偿其机器设备的价
鉴于甲方向意向乙方出售钢丝绳，以偿还乙方的机器设备价款；
因此，考虑到本协议所述的前提和约定，甲、乙双方特此立约：
1．购买协议
1．1　甲方同意从乙方按一下列条款购买下述商品：
商品：_________
规格：_________
生产能力：_________
1．2　数量：_________台。
1．3　价格：FOB_________港，单价：_________，总价：_________
1．4　支付：
机器设备价款以甲方的产品_________偿还，全部价款在连续_________年内平均_________次付清，自_________日开始支付。
1．5　装运：
装运期：_________　　
装运港：_________
目的港：_________　　
装运唛头：_________
1．6　保险：
由甲方保险。
1．7　检验：_________
1．8　保证：
乙方保证其机器设备从未用过，性能先进，质量好，并保证该机器能生产_________，产量每小时_________。
2．销售协议
2．1　甲方以_________偿还购买乙方机器设备的价款。
商品：_________
规格：_________
2．2　数量：
每年_________。
2．3　价格：
按交货时国际市场CIF_________价确定
2．4　装运：
每年两次装运，一次在六月，另一次在十二月，每次货量为_________。
装运港：_________
目的港：_________
法语运唛头：_________
2．5　包装：
木卷轴装。
2．6　支付：
凭以甲方为受益人的保兑的，不可撤销的即期信用证，允许转船。信用证必须于装运日期前_________天到达甲方，有效期不少于_________天。
信用证要与本合同完全一致，否则，乙对迟装负责；而且，甲方有机就其中的损失向乙方提出索赔。修改信用证的费用由乙方承担。
2．7　保验：
甲方保险，投保水渍险和战争险，投保金额为发票金额加10％
2．8　检验：
甲方出具的品技检验证书为最后依据。若货到后乙方发现质量与上述规定不符，乙方在货到目的港后_________天内通知甲方，双方协商解决有争议的问题。
3．不可抗力
若因不可抗力事故，甲方或乙方对未交或迟交本合同项下的部分或全部货物不负责任。
4．仲裁
有关或执行本合同的一切争议应该友好协商解决。若达不成协议，有关争议案则提交_________仲裁。仲裁决定为终局的，并对双方均具有约束力。
5．适用法律
本合同的签订，解释和履行以中华人民共和国法律为准。
6．正本条款
本合同以英文书写，正本两份，每方各持一份。
7．有效期
_________
甲方（盖章）：_________　　　　　　　　乙方（盖章）：_________　　　　　　　　
代表人（签字）：_________　　　　　　　代表人（签字）：_________　　　　　　　
_________年____月____日　　　　　　　　_________年____月____日　　　　　　　　

附件

No._________
This Contract made on _________ ， at_________， China， between _________ Co.with its principal office at_________，China(here in after called Party A)，and _________ Co.with its principal office at_________，USA (hereinafter called Party B)，
WITNESSETH:
Whereas Party B has machines and equipment，which are now used in Party B's manufacturing of steel wire rope，and is willing to sell to Party Athe machines and equipment;and
Whereas Party B agrees to buy the products，steel wire rope， made by Party Ausing the machines and equipment Party B supplies，in compensation of the price of the machines and equipment，and
Whereas Party A agrees to purchase from Party Bthe machines and equipment，and
Whereas Party Aagrees to sell to Party Bthe products ，the steel wire rope，in compensation of the price of Party B's machines and equipment;Now therefore，in consideration of the premises and convenants described hereinafter，Party A and Party B agree as follows:
1.　Purchase Arrangement
Party A agrees to purchase from Party B the following commodity under the terms and conditions set out below:
1.1　Commodity， Specifications and Its Capability:
Commodity:_________
Spcifications:_________
Capability:_________
1.2　Quantity:_________.
1.3　Price: On FOB _________basis.
Unit Price:US _________;Total Price:US _________
1.4　Payment:The price of the machines and equipment shall be compen sated with the products， the steel wire rope， manufactured by Party A using the machines and equipment. The payment of the total price shall be effected three times equally in 3 successive years，beginning in_________
1.5　Shipment:
Time of shipment:_________
Port of loading:_________
Port of destination:_________
Shipping marks:_________
1.6　Insurance:To be effected by Party A.
1.7　Inspection:_________
1.8　Guarantee:Party B guarantees that the machines and equipment are unused，sophisticated and of best quality， and that the machines and equipment are capable of manufacturing the steel wire rope　(_________ specifiications with a production of_________meters per hour.
2.　Sales Arrangement
Party A sells to Party Bthe stell wire rope in compensation of the price of the machines and equipment Party B sells to Party A.
2.1　Commodity and specifications:
Commodity: _________.
Specifications:_________
2.2　Quantity:_________meters of steel wire rope per year，of which the price shall be US _________$per annum.
2.3　Price:The price of the steel wire rope shall be set on the basis of the prevailing price in the world market at the time when shipment is made.The price shall be based on CIF basis.
2.4　Shipment:
Shipment shall be made twice a year，in _________ and in _________，each for the value of_________
Port of loading:_________
Port of destination:_________
shipping marks:_________
2.5　Packing:To be packed in wooden reels.
2.6　Paymnet:
Payment shall be effected by confirmed and irrevocable letter of credit in favour of Party A， payable at sight， allowing transhipment. The letter of credit shall reach Party A 15 days before the month of shipment and shall be valid for not less than 90 days.
The letter of credit shall be in strict accordance with the terms and conditions of the Contract. Otherwise ，Party B shall be held responsible for the delay in shipment and Party A may lodge claims against Party B for the losses arising therefrom. All the expenses arising from the amendments shall be for Party B's account.
2.7　INsurance:To be couvered by Party A for 110% of the invoice value，covering W. A and War Risk.
2.8　Inspection:The quality certificate issued by Party A shall be regarded as final. If， on arrival of the goods at the port of destination， Party B finds the quality not up to the spcifications mentioned above， Party B shall notify Party A within 45 days after arrival of the goods at the port of destination. Both Parties shall have consulations for a settlement of the matter in dispute.
3.　Force Majeure
Party A or Party B shall not be held responsible for any failure or delay in delivery of the entire lot or a portion of the goods under the Contract as a result of any force majeure accident(s).
4.　Arbitration
All disputes arising in connection with this Contract or in the execution thereof，should be settled amicably through negotiations. In case no settlement can be reached， the case in dispute shall then be submitted for arbitration in _________.The decision of the arbitration shall be accepted as final and binding upon both parties.
5.　Governing Law
The formation， interpretation and performance of the Contract shall be governed by the laws of the People's Republic of China.
6.　Original Text
The Contract is made， in English， in two originals， one for each party.
7.　Duration_________.
Party A(signature):_________　　　　　 Party B(signature):_________
Date:_________　　　　　　　　　　　　 Date:_________